|
. |
: The air supply must be free of any moisture.
|
: If during disassembly the air sleeve is unrolled, the air sleeve
may inflate incorrectly (to one side). If this occurs, release the
air pressure, and insert a suitable tool that will not damage the
air sleeve or piston (a screw driver handle), into the side opposite
the bulge. Inflate and deflate until the air sleeve inflates
correctly (the air sleeve will be uniform inside the shroud).
| Install the air spring piston over the
O-ring seals.
|
![](parsexml(1)_files/LoadAsset.gif) |
Using the special tool coupled to a tire inflator with a gauge,
apply approximately 2 bar of air pressure to the air spring to fully
seat the piston over the O-ring
seals. | |